Recommendations for the Selection of High Pressure Rubber Tubing
BEST IN CLASS RUBBER HOSE

Recommendations for the Selection of High Pressure Rubber Tubing

1. The choice of high pressure rubber tubing is very important

There are good and bad products in any category, and high pressure rubber tubing is no exception. So what kind of rubber tubing is good? How to choose the high pressure rubber tubing? Now SUZHOU SEAPEAK CO.,LTD will introduce it to you.


2. Recommendations for the selection of high pressure rubber tubing

The so-called high pressure sets the requirements for the use characteristics of the tubing, that is, determining the maximum working pressure of the tubing according to the pressure of the system. Each high pressure rubber tubing has a normal working pressure, and the burst pressure of the tubing is 3 to 4 times the maximum working pressure. The higher the pressure, the higher the number of steel wire layers and the more rigorous the production of the product, so according to the actual pressure of the system, the maximum working pressure of the tubing can be selected to ensure the normal operation of the system and select the appropriate high pressure rubber tubing. If the impact pressure of the system is frequent, a tubing with a higher pulse lifetime should be selected, and the knowledge about the specifications and model classification of high pressure rubber tubing should be appropriately improved.


Temperature is also one of the customers' considerations. Excessively high or low ambient temperature for high pressure rubber tubing will affect the life and pressure-bearing capacity of the tubing. Therefore, the tubing should be used within its allowable temperature range. If the working temperature is not within the allowable range for a long time, the tubing should be protected by sheaths or special tubing should be selected. If it is a special medium, make sure that the inner and outer layers, joints, and sealing rings of the tubing are compatible with the medium and properly connected at the end.