1. Proper use of PVC/Nitrile Layflat Hose
It is very important to determine the length of the
pvc layflat hose you need. At the same time, you should check whether the service conditions of the pvc hose pipe meet the requirements of the selected rubber tube. You should make sure that the pvc hose pipe you will use is the most appropriate. The working pressure and suction value should be carefully determined. In particular, it should be noted that sudden pressure changes or pressure peaks exceeding the allowable maximum will greatly shorten the life of rubber tubes. The ends of the
pvc hose pipe cannot be immersed in the conveyed material continuously.
If you install the rubber tube with a bending radius less than the prescribed minimum, the service life of the rubber tube will be greatly shortened. Therefore, before installation, you are advised to consult on the use of information, especially the rubber tube bending radius information.
3. Maintenance of PVC/Nitrile Layflat Hose
Cleaning: After use, it is recommended that you empty the hose. Cleaning should be done if necessary. Inspection: After each use, the rubber pipe must be inspected to ensure that there is no structural damage. Pressure: Hydraulic testing is recommended if the rubber tube is under severe pressure during use or if the outer layer of the rubber tube will be in contact with the transported liquid for a long time.
